Used Machines

Used machines and Ex Demonstation Machines

Suregrave/ Dahlgren : Wizzard ST HD2

Wizzard ST HD2

The Wizzard ST HD2(Smart Table USB), the latest version in a long line of successful Wizzard tables, has a 12″ x 12″ (304mm x 304mm)table designed for general purpose, light-duty engraving. The Wizzard ST offers greater Z clearance, allowing bulkier objects to be engraved, a larger 1/4″ cutter, which means larger character sizes are more easily achieved. Hi Drive II is possibly the most advanced motion control system available. It utilises state of the art electronic parts combined with the most advanced motion parameters to give optimum performance at an affordable price.

Xenlab R & I software included

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

Price: £3495 plus VAT

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

Suregrave/ Dahlgren : Wizzard ST

The Wizzard ST engraver at its peak was one of the best machines in the UK. This machine has a small footprint but is a very robust piece of kit. It can engrave onto brass, plastic, wood and do diamond marking onto Steel and Aluminium.  The machine is capable of cutting out
brass and plastics with no problem at all.

The machine is controlled via RS232 cable to a computer and can be used with either Cadlink software or Suregrave/Dahlgrens very own Super Pro 6

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

Price:POA

Suregrave : System 2516HL

The System 2516HL engraver is still one of the best machines in the UK. This machine has a medium footprint and is a very robust piece of kit. It can engrave onto brass, plastic, wood, steel and aluminium.  The machine is capable of cutting out brass and plastics with no problem at all. With its larger Z bridge — the machine is capable of holding much thicker items on the bed.

The machine is controlled via the latest Hi Drive II controller. The Hi Drive II  controller is possibly the most advanced motion control system available. It utilises state of the art electronic parts combined with the most advanced motion parameters to give optimum performance at an affordable price.

Machine Specification

635 x 409mm Solid Aluminum Work Table, including clamps
Hi Drive II USB controller
Precision 1/4 collet spindle
Virtual Hand Set
Spindle Motor (20,000 rpm at spindle)

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

Xenetech  : XOT 1625

The Xenetech Viper 1625 has a 16” by 25”  (406.4mm by 635mm) engraving area with high precision and rigidity.  The 1625 will deep engrave, cut, diamond drag and burnish into various metals – aluminum, brass, steel, etc. and  into plastics, wood, and glass for signs, nametags, trophies, awards, small jewellery items, tools, industrial parts, identification plates, traffolyte engraving and control panels.

The Viper Electronics connect via Ethernet connection. This type of connection will allow you to download jobs from multiple computers on your local network straight to the machine. The jobs can be easily downloaded to a job queue and recalled by the engraving system operator.

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

Suregrave : Excalibur

This machine has a medium footprint and is a very robust piece of kit. It can engrave onto brass, plastic, stone and woods.  The machine is capable of cutting out brass and plastics with no problem at all. With its larger Z bridge — the machine is capable of holding much thicker items on the bed, this machine also comes with a Vac bed.

With router speeds of up to 24,000RPM and a 1/4″ collet it is ready to start using.

The machine is controlled via the latest Hi Drive II controller. The Hi Drive II  controller is possibly the most advanced motion control system available. It utilises state of the art electronic parts combined with the most advanced motion parameters to give optimum performance at an affordable price.

Machine Specification

635 x 409mm Solid Aluminum Work Table, with Vac Bed
Hi Drive II USB controller
1/4 collet
Virtual Hand Set
Router Motor (24,000 rpm at spindle)

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

 

All Trademark names and logos acknowledged.

 

 

 

 

Last Tweets