We are now Safecontractor approved!

0

WE ARE NOW SAFECONTRACTOR APPROVED!

UK Engraving Services Ltd are now Safecontractor approved! The aim of the Safecontractor scheme is to provide a health and safety audit service for contractors. We have committed to the scheme to show our customers and clients that we are serious about the well being of our contractors, clients and customers.

Who are Safecontractor?

Safecontractor have over 10 years of experience delivering accreditation services, backed up by a team of highly skilled in-house health & safety auditors. These auditors use their specialist knowledge to assess our accreditation questionnaires. They are one of the leading health and safety assessment schemes currently operating in the UK. With over 300 clients and nearly 27,000 contractor members. Some of the largest organisations in the UK use Safecontractor to reduce operational risk.  You can check out more about them here http://www.safecontractor.com/home/

 

Gem FX5 – Flatbed Engraver

0

The Perfect Versatile Flatbed
Engraving Machine

  • The GEM-FX is a great professional engraving
    system.
  • The GEM-FX can cope with most industrial
    marking tasks, labels, switch sockets, tags,
    tools, identification plates. The GEM-FX can
    handle them all with speed and precision.
  • With a generous engraving area of 265 x 205
    mm (10.4″ x 8″), engraving speeds of up to
    133 mm/sec (diamond drag), no task is too
    demanding.
  • Type the text into the easy to use U-MARQ
    FX engraving software, insert the item to be engraved into the machine. The GEM-FX then engraves the
    object in just a few seconds.
  • Equipped with the state-of-the-art U-MARQ revolutionary GEM-AX control system, the GEM-FX will connect
    to a standard PC or laptop using the USB interface.
  • Its ease of use enables everyone to engraving labels, tags, name plates etc., to a professional standard,
    after just a short introduction and training sessions on the machine.
  • The uncluttered design combined with the mechanical stability, enables easy engraving of large or small
    items. All this on the same system, which seconds later can be engraving lettering only a fraction of a
    centimetre high.

Pet Tags

The GEM-TX is ideal for engraving Pet Tags quickly and efficiently with templates for most Pet Tags. Why be restricted to text, with the GEM-TX you can engrave any type of graphic images, logos its only limit is your imagination.

Perfect Engraving
The U-MARQ GEM-FX Engraving Machine, can engrave labels, valve tags, valve labels and many other types of
industrial marked products.

Centre Vice
Using the Centre Vice, Standard Jigs and Jig Pins, turns the GEM-FX into an exceptionally fast and efficient
centre vice engraver.

Industrial Engraving
The U-MARQ GEM-FX can cope with most industrial marking tasks. Labels, switch sockets, tags, tools, identification plates the GEM-FX can handle them all with speed and precision. With a generous engraving area of
265 x 205 mm (10.4” x 8”), engraving speeds of up to 133 mm/sec (diamond drag), no task is too demanding
for this small foot print industrial engraver.

Vice and Jigs
With an optional vice available to purchase, using the Centre Vice, Standard Jigs and Jig Pins, turns the GEM-FX into an exceptionally fast and efficient centre vice engraver.. The wide range of push-fit jigs quickly clamp many items, including; scrolls, medals, cufflinks, watches, trophy plates, pet and ID tags, rings,  clocks, pendants, baby gifts, key fobs, lighters, and other items. With unique pressure settings, even fine gold lockets can be engraved without fear of damage.

 

Compatible with Windows XP (sp3), Vista and Windows 7, 8 & 10

Price: £4250.00 plus VAT and shipping

(training can be provided at an additional cost)

 

Finance and Rental is available on this machine – http://www.ukengravingservices.co.uk/finance-rentals

 

*Used Machines Available*

0

We offer many specialised products and services, please contact us for a full list of machinery equipment we have available.

 

Used machines and Ex Demonstation Machines

 

 

Suregrave/ Dahlgren : Wizzard ST HD2

Wizzard ST HD2

The Wizzard ST HD2(Smart Table USB), the latest version in a long line of successful Wizzard tables, has a 12″ x 12″ (304mm x 304mm)table designed for general purpose, light-duty engraving. The Wizzard ST offers greater Z clearance, allowing bulkier objects to be engraved, a larger 1/4″ cutter, which means larger character sizes are more easily achieved. Hi Drive II is possibly the most advanced motion control system available. It utilises state of the art electronic parts combined with the most advanced motion parameters to give optimum performance at an affordable price.

Xenlab R & I software included

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

 

Price: £3495 plus VAT

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

 

Suregrave/ Dahlgren : Wizzard ST

 

The Wizzard ST engraver at its peak was one of the best machines in the UK. This machine has a small footprint but is a very robust piece of kit. It can engrave onto brass, plastic, wood and do diamond marking onto Steel and Aluminium.  The machine is capable of cutting out
brass and plastics with no problem at all.

The machine is controlled via RS232 cable to a computer and can be used with either Cadlink software or Suregrave/Dahlgrens very own Super Pro 6

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

 

Price:POA

 

Suregrave : System 2516HL

The System 2516HL engraver is still one of the best machines in the UK. This machine has a medium footprint and is a very robust piece of kit. It can engrave onto brass, plastic, wood, steel and aluminium.  The machine is capable of cutting out brass and plastics with no problem at all. With its larger Z bridge — the machine is capable of holding much thicker items on the bed.

The machine is controlled via the latest Hi Drive II controller. The Hi Drive II  controller is possibly the most advanced motion control system available. It utilises state of the art electronic parts combined with the most advanced motion parameters to give optimum performance at an affordable price.

Machine Specification

635 x 409mm Solid Aluminum Work Table, including clamps
Hi Drive II USB controller
Precision 1/4 collet spindle
Virtual Hand Set
Spindle Motor (20,000 rpm at spindle)

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

 

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

 

Xenetech  : XOT 1625

The Xenetech Viper 1625 has a 16” by 25”  (406.4mm by 635mm) engraving area with high precision and rigidity.  The 1625 will deep engrave, cut, diamond drag and burnish into various metals – aluminum, brass, steel, etc. and  into plastics, wood, and glass for signs, nametags, trophies, awards, small jewellery items, tools, industrial parts, identification plates, traffolyte engraving and control panels.

The Viper Electronics connect via Ethernet connection. This type of connection will allow you to download jobs from multiple computers on your local network straight to the machine. The jobs can be easily downloaded to a job queue and recalled by the engraving system operator.

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

 

Suregrave : Excalibur

This machine has a medium footprint and is a very robust piece of kit. It can engrave onto brass, plastic, stone and woods.  The machine is capable of cutting out brass and plastics with no problem at all. With its larger Z bridge — the machine is capable of holding much thicker items on the bed, this machine also comes with a Vac bed.

With router speeds of up to 24,000RPM and a 1/4″ collet it is ready to start using.

The machine is controlled via the latest Hi Drive II controller. The Hi Drive II  controller is possibly the most advanced motion control system available. It utilises state of the art electronic parts combined with the most advanced motion parameters to give optimum performance at an affordable price.

Machine Specification

635 x 409mm Solid Aluminum Work Table, with Vac Bed
Hi Drive II USB controller
1/4 collet
Virtual Hand Set
Router Motor (24,000 rpm at spindle)

The machine is in A1 condition and has been fully serviced by our inhouse technical specialists and can be tested prior to it being purchased.

For more information please call call 01403 786242 or email info@ukengravingservices.co.uk

 

 

 

 

 

 

 

All Trademark names and logos acknowledged.

 

 

 

 

 

 

 

 

Last Tweets